Waste Water Treatment Plant Static Screen Filter for Solid Liquid Separation

Product Details
Customization: Available
Type: Water Filtration
Method: Physical Treatment
Manufacturer/Factory, Trading Company
Diamond Member Since 2018

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
5000000 RMB
Plant Area
501~1000 square meters
  • Waste Water Treatment Plant Static Screen Filter for Solid Liquid Separation
  • Waste Water Treatment Plant Static Screen Filter for Solid Liquid Separation
  • Waste Water Treatment Plant Static Screen Filter for Solid Liquid Separation
  • Waste Water Treatment Plant Static Screen Filter for Solid Liquid Separation
  • Waste Water Treatment Plant Static Screen Filter for Solid Liquid Separation
  • Waste Water Treatment Plant Static Screen Filter for Solid Liquid Separation
Find Similar Products

Basic Info.

Model NO.
static screen
Usage
Industrial, Agriculture, Municipal Wastewater Treatment
Product Name
Static Screen Filter
Brand
Ecopro
Capacity
15-40m3/H
Mesh Size
1-3mm
Power
0.37
Material
SUS304
Outlet Flange
DN200
Inlet Flange
DN150
Specification
998*1519*1652
Trademark
ECOPRO
Origin
Shanghai
HS Code
842199
Production Capacity
100000/Week

Product Description

Static Screen Introduction

 

Static screen is mainly used for the pretreatment of wastewater treatment,which can effectively 

remove most of the suspended solids in the wastewater and reduce the processing load of 

subsequent processes, also used for solid-liquid separation and recovery of useful substances in induatrial wastewater treatment. It is an excellent non-powered device for filtering or recovering solid or colloidal substances such as suspended solids, floating matter and sediment.


 

Waste Water Treatment Plant Static Screen Filter for Solid Liquid Separation
Waste Water Treatment Plant Static Screen Filter for Solid Liquid Separation



 

Design and Structure

 
  • Curved Screen Design: The defining feature of a static screen is its curved or arc-shaped design. The screen surface is created by wrapping wires around support rods curvedly. This curvature allows the sieve bend to operate with gravity, as the liquid-solid mixture flows over the curved surface.
 
  • Slot Openings: The static screen is made up of slotted openings. Depending on the specific application and the desired separation or filtration requirements, these openings can vary. The size of the slots determines what size particles can pass through the screen and what is retained.


 

  Applications

 
  • Mining: Used to separate ore particles of different sizes, removing fine particles from the slurry to obtain a more concentrated ore product12.
 
  • Water Treatment: Applied in municipal and industrial wastewater treatment plants to remove large solids, debris, and some suspended solids from the influent water, reducing the load on subsequent treatment processes such as grit removal, sedimentation, and biological treatment.
 
  • Food Processing: Can be used to separate solids from liquid food products or food waste slurries, facilitating the recovery of valuable components or the proper disposal of waste.
Waste Water Treatment Plant Static Screen Filter for Solid Liquid Separation

 

 

Static Screen Advantages
 

  • Cost-Effective: Static screens do not require electricity to operate, and their purchase and installation costs are relatively low, especially considering they help make the rest of the wastewater treatment process more manageable.
  • Low Maintenance: They require very little maintenance. Some are equipped with self-cleaning mechanisms such as water spray or bar rakes that clear the screen's bars as the system moves around with the water's current, reducing the need for manual cleaning and maintenance.
  • Effective Filtration: The mesh screens can capture a wide range of small particles, such as solidified grease, undigested food particles, or bone particles, effectively removing them from the wastewater before further treatment, which eases wear and tear on downstream equipment and speeds up the overall treatment process.
  • Versatile and Adaptable: Static screens come in a variety of sizes and formats, making them easy to fit into existing systems. They can operate effectively under different flow rates, temperatures, and other environmental conditions, without being affected by changes in these factors.
 

Static Screen Work Process
 

The main body of the static screen is a stainless steel curved or flat filter screen made of wedge-shaped steel rods. The wastewater to be treated passes through the weir and is evenly distributed to the inclined screen surface. Since the surface of the screen is small and smooth, the back gap is large, the drainage is smooth, it is difficult to block. The solid matter is trapped, and the filtered water flows out from the gap of the sieve plate. At the same time, under the action of hydraulic force, the solid matter is pushed to the lower end of the sieve plate to discharge, thereby achieving the purpose of solid-liquid separation.


Material Introduction and Flow: The material, often a slurry or a mixture of liquid and solid particles, is introduced at the top of the static run-down screen. Due to gravity, the material flows over the curved surface.
• Separation Process: The liquid component of the mixture passes through the slots in the sieve bend, while the solid particles are retained on the screen. The curved profile of the sieve bend assists in dewatering the material. As the liquid passes through the screen, the solids are left behind, forming a cake or layer on the screen surface.

 

Static Screen Technical Data



 

Model&Description SHS-300 SHS-500 SHS-600 SHS-800 SHS-1000 SHS-1500 SHS-2000
Mesh Size(mm) 3 5 6 8 10 15 20
Screen Length(mm) 1429 1429 1429 1429 1429 1429 1429
Screen Width(mm) 429 629 699 929 1128 1628 1928
Screen Height(mm) 1898 1898 1898 1898 1898 1898 1898
Reference Weight(kg) 158 188 258 278 278 298 398


If more detailed dimensions are needed, please contact us.





 

FAQ:
 

 

Q: I want to add my logo or design of my own, is it ok?
A: Yes,it's no problem,we can put your logo on the machine,We can also slightly adjust the equipment according to your site needs, such as the position of the water inlet and outlet, the diameter of the pipe, etc.


Q. How to pay?
A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing,70% balance before loading by TT

Q.What is the delivery time?
A: lt depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.

Q. How to pack the products?
A: We use standard package. lf you have special package requirements, we wil pack as requiredbut the fees will be paid by customers.

Q.How to keep your equipments from corrosion?
A: We use the world-famous paint, like SigmaCoatings,PainBow,etc. What's more, we paint strictlyaccording to the standard process.

Q. How do you manufacture your equipment ?
A.Our machining technology includes laser/plasma cutting, automatic welding,CNC cutting andbending.

Q.How to install after the equipments arriving destination?
A: We will provide detailed illustrations to you. lf it is necessary, we will send technicians to helpyou. However, the visa fee, air tickets, accommodation, wages will be paid by buyers.






 

WE HAVE MORE......

PLEASE CONTACT US!
Waste Water Treatment Plant Static Screen Filter for Solid Liquid Separation
Waste Water Treatment Plant Static Screen Filter for Solid Liquid Separation



 

 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier